DMXelf 4+

重要提醒

● 版本 1.1.9+ 必须配合 24+ 版本固件使用，否则将无法正常使用

● 如果你没有收到24版本的固件推送，请不要单独升级软件，直到你收到了新版固件的推送。

主要功能重构
1. 固件模块全面重构
2. RDM 扫描功能重构：提升扫描成功率
3. DMX 传输性能优化：提高实时帧率


功能优化
1. 信号线检测升级为实时更新
2. 信号跟踪功能优化
1) 提高采样率

2) 限制最长采样时间（30帧率下约120秒）
3. 录制程序帧率优化
4. DIP拨码逻辑优化，支持域的增减


Bug修复
1. 修复信号跟踪功能的按钮逻辑错误
2. 修复RDM相关问题：
1) 修改设备名称与地址现在可实时更新
2) 为RDM列表中识别灯具按钮添加醒目样式

3. 修复iOS蓝牙设备显示名称错误
4.修复英文用户协议显示错误
5.修复录制程序按钮导致的软件崩溃问题


其他更新
1. 固件更新功能改进
2. 修复其他已知问题

Important Notice
● Version 1.1.9+ requires firmware version 24+ to function properly.
● If you haven't received the firmware version 24 update notification, please do not upgrade the software alone until you receive the new firmware update.

Major Restructuring
1. Complete restructuring of firmware module.
2. RDM scanning feature restructured: Improved scanning success rate.
3. DMX transmission performance optimization: Enhanced real-time frame rate.

Feature Improvements
1. Signal cable test upgraded to real-time updates.
2. Signal tracking optimization.
1) Increased sampling rate
2) Limited maximum sampling time (can record signal changes for approximately 120 seconds at 30fps)
3. Recording program frame rate optimization
4. DIP switch logic optimization, supporting domain addition and reduction


Bug Fixes
1. Fixed button logic error in signal tracking function.
2. Fixed RDM-related issues:
1) Device name and address modifications now update in real-time
2) Added prominent style to fixture identification button in RDM list
3. Fixed Bluetooth device name display error on iOS.
4. Fixed protocol display error for English users.
5. Fixed software crash caused by recording program buttons.

Other Updates
1. Improved firmware update functionality.
2. Fixed other known issues.

(Note: The above English description is translated by AI. For detailed information, please contact us.)