SpeedyBee App 4+

Name: SpeedyBee App
Rating: 2.3 (4 reviews)
Author: CAMERA2000 LIMITED

CAMERA2000 LIMITED

iPad için tasarlandı

- 2,3 • 4 Oy

- Ücretsiz

Açıklama

SpeedyBee is an Appllication for Flight controller parameters settings.
Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight.

Flight Controller Requirements:
Betaflight firmware version ≥ 3.1.0
iNav FC version ≥ 1.8.1
Butterflight firmware version ≥ 3.1.0

System Requirements : iOS 12.0+

Instructions for use：
1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated Bluetooth.
2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value.
3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.

26 Oca 2025

Sürüm 1.8.17

1. Adapted to new Meteor LED.

2,3/5

4 Oy

speedybee no backup iOS

speedybee no backup iOS .

Not compatible with Inav 7.1

Not compatible with Inav 7.1, please update the software

Harika

Sahada kullanırken büyük kolaylık👍

CAMERA2000 LIMITED adlı geliştirici, uygulamanın gizlilik politikasına göre verilerin aşağıda açıklandığı gibi işlenebileceğini bildirdi. Daha fazla bilgi için geliştiricinin gizlilik politikası bölümüne bakın.