TslaMirror 4+

Improve Lossless audio support.

Tips for Tesla Browser:
To ensure that the Tesla browser is using the latest version of a webpage, you can clear your vehicle's browser data (like you would on a computer or smartphone) by navigating to Controls > Service > Clear Browser Data. Check the boxes on the touchscreen popup to exclude bookmarks and/or history for your convenience.

4.00 version:
1. Add support for Lossless Audio, which can be played through the browser. Lossless audio is only available in H.264 mode.
2. In H.264 mode, a new option "Lossless Audio" has been added, which is enabled by default. This option controls whether audio data is sent to the browser.
3. Lossless audio cannot transmit all iPhone audio to the browser. If the audio data is protected by DRM, whether the audio data can be transmitted to the browser depends on the settings of the third-party app. If the audio data is not protected by DRM, it can be recorded and transmitted to the browser. The restrictions on whether audio data can be recorded are similar to those for screen recording, depending on whether the third-party app allows the app's screen audio to be recorded.
4. The parameters for lossless audio are: 44.1 kHz, stereo, 16-bit. This provides CD-quality sound, which is generally superior to Bluetooth audio transmission.
5. Due to browser limitations, at least one interaction is required to play audio. By clicking the audio button in the upper right corner of the browser once, audio playback can start. The audio button in the upper right corner will disappear automatically after thirty seconds. Touching the screen again will make the button reappear. The audio button in the upper right corner of the browser functions both as a "Start Audio" and "Restart audio" button.
6. Due to transmitting audio data to the browser via iPhone's Wi-Fi Personal Hotspot, the initial audio delay is minimal. However, during long-term audio playback, the accumulated delay might increase. In such cases, pressing the audio button in the upper right corner of the browser to "Restart Audio" will reset the delay to its minimal state.
7. The network conditions of the iPhone's Wi-Fi Personal Hotspot also depend on the carrier's signal. It is recommended to use a carrier with 5G or 4G signals. The 5G carrier signal is the best.
8. Additionally, ensure that the iPhone's Wi-Fi Personal Hotspot is set to the 5GHz band. Note that the Wi-Fi band and the carrier signal band are two different parameters.

3.00 version:
1. Added support for the new H.264 mode. Please use the new H.264 mode whenever possible.
2. The H.264 mode is smoother.
3. The H.264 mode has lower latency.
4. The H.264 mode supports frame rates up to 60fps(frames per second), with a default of 15fps.
5. The resolution and frame rate parameters of the H.264 mode are related to the performance of Tesla vehicles. It is recommended to use lower parameters for older Tesla models and to gradually increase these parameters for newer Tesla models to suit your actual situation.
6. The default "Image quality" parameter for the H.264 mode is "Standard". This parameter is related to the network environment of the Tesla vehicle, which can be very volatile. It is not recommended to set this parameter too high and should be adjusted based on actual testing conditions of the Tesla vehicle. Ensuring that the iOS Personal Hotspot is set to 5GHz will help improve network quality. The iOS Personal Hotspot is set to 5GHz when the "Maximize Compatibility" option in iOS settings is turned off. When the "Maximize Compatibility" option is turned on, it uses 2.4GHz. Therefore, it is best to keep the "Maximize Compatibility" setting turned off in the iOS Personal Hotspot settings. Note that sometimes you may need to adjust the "Maximize Compatibility" option to connect the Tesla vehicle to the iOS Personal Hotspot, but once connected, you can always turn off the "Maximize Compatibility" option.