STEINEL DCS‪™‬ 4+

Name: STEINEL DCS™
Author: Steinel GmbH

Steinel GmbH

Entwickelt für iPad

- Gratis

Beschreibung

This is the STEINEL DCS™ Commissioning App for the STEINEL Digital Control Solution™ line of products. The STEINEL DCS™ integrates load control with occupancy sensors, photo sensors and switches to provide simple code compliant solutions for lighting, plug load and HVAC integration through BACnet.
Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a STEINEL DCS™ Digital Controller, which communicates to the sensors and switches by the 2 wire bus.

Key Features Include:
• 3 x 20A Relays (expandable via BLE Mesh)
• Current Monitoring Per Relay
• 3 x 0-10v Dimming Zones
• Multizone Daylight Harvesting
• Partial On & Off
• 20 A Receptacle Control
• Use Cases
• Demand Response Input
• 24V External Input Signal
• Internal Time Clock
• Sequence of Operations
• Min. & Max. manual dimming levels
• Light Scenes
• Wired data line
• BLE MESH for groupings
• BACnet
• External Relay Support
• BACnet COV subscription
• Inbuilt firmware embedded in app
• Photosensor Outdoor logic
• Time slice capacity increased to 9
• Astro function

13. Feb. 2025

Version 1.0.7

• Note: After upgrading FW from 3.0.6r to 3.4.8 , Please connect the DCS and perform a factory reset manually (For Backward compatibility)
• 3.4.8 FW embedded in the app
• Ability to connect to a DCS and LOCATE it without having to download data
• Help Function
• L-DALI - External relay improved importing of all relays after bus reset or factory reset
• Sensor advance setting added to sensor screen
• Device Identification - Continue blink until additional button press
• Ultrasonic Sensors sensitivity factory settings change to 50% for the DT Quattro and US Quattro
• Removed toggle function from switches - all switch factory settings must be All ON/OFF function
• BACnet - added switches to BACnet
• BACnet - characters that are not allowed in BACnet names should not be allowed to be entered in the app when naming
• BACnet – object added for Occupancy Sensor Sensitivity
• BACnet object added for occupancy sensor identification
• Maximum 32 Occupancy Sensors, 32 Photo Sensors, 8 Switches & 5 External relays

Der Entwickler, Steinel GmbH, hat darauf hingewiesen, dass die Datenschutzrichtlinien der App den unten stehenden Umgang mit Daten einschließen können. Weitere Informationen findest du in den Datenschutzrichtlinien des Entwicklers.