3pRally - TSD Rally 4+

3pRally is the most complete tool for Regularity Rally (TSD).

3pRally needs a device with GPS to work. GPS sensor can be either the internal one or external (eg. Garmin GLO 2, Dual XGPS150A, etc)

Main features are:
- All the relevant information are always available on the Main View (Stage Number, Speed, Time and Distance)
- Let the app talk to you! It can announce Partial Distance, Current Speed & Average Speed with the frequency you need (Settings)
- You can get a “beep” to keep track of the distance you drove (if you don't like voice announcements)
- Change the main information displayed by simply tapping them from the top of the screen, or in Settings to show more info at the same time
- Reset the partial counter (distance, time and average speed)
- Quick Restart to reset all the counters (Partial and Total) and restart with just two taps
- Control the app via Flic and Flic 2, the smartest wireless buttons (http://flic.io)
- Possibility to unlink the average speed from the partial counters (time and distance)
- Choose to show the Current or the Total Average speed (in addition to the partial average speed)
- Reverse/Rewind button to decrease the distances in case you missed a turn
- Pause button in case you need to temporarily stop the trail (to be enabled in Settings)
- Customise the position of the Reset Buttons on the screen (left or right)
- Test the GPS reception quality (in Settings or double tapping the GPS Accuracy on the main screen)
- Select the GPS accuracy to discard measurements that are not good enough
- Manually or automatically save your tracks (enable Auto Save to save them all)
- Add your own information to the saved tracks (name & description)
- Export the saved tracks in GPX or KML format (accessible from the saved tracks list in the Map View)
- Share pics of your tracks with your friends
- Works with miles or kilometres
- Dark Mode support
- Reduce the risk to erroneously change the view by enabling "two fingers swipe" & "double tap buttons (Settings)
- Speed an be visualised with 1, 2 or without decimals (Settings)
- Distances can be visualised with 2 or 3 decimals (Settings)
- Auto-start to delay the start by +30 secs, +60 secs or configure a specific time (Settings)
- with Auto-start on, you can have the app counting down (beep or voice) 5 or 10 secs before the starting time
- Show/hide the current position coordinates (only with “More Info” enabled)
- Sync the app's time with the Rally's "Official Time"
- Display the Time and the Timers using the format you prefer between seconds, tenths (12:59:59.9), hundredths (12:59:99) or thousandths (12:59:999) (Settings)
- Possibility to hide the average speed (Settings)
- Audio confirmation for the navigations buttons (enabling "Sounds" in "Settings")
- It works with most of the external GPS, we tested Garmin GLO 2 and Dual XGPS150A

Manually adjust the distances by double-tapping the labels (when distances are the main information displayed). From there, you can:
- adjust the distances by entering the correct one
- calibrate your GPS with the official measures (applying a % calibration) or enter the new distance and the app will calculate it for you!

You experienced an issue or want to suggest how to improve 3pRally? Tell us via support (at) 3pmaster.com or directly within the app (from the "Settings")

Note:
Mobile Data connection is only required to access the maps.
Continued use of GPS running in the background can dramatically decrease battery life.

Disclaimer:
Please consider that 3pRally relies on the device GPS to measure the distances you travel. Accuracy may vary depending of the GPS satellite reception quality.

Thanks to icons8.com for several icons (http://icons8.com).
Thanks to Alice & Flavia for their patience and to Quinten for his fantastic support!