SpeedyBee App 4+
APP for FC parameter settings
CAMERA2000 LIMITED
Designed for iPad
-
- Free
Screenshots
Description
SpeedyBee is an Appllication for Flight controller parameters settings.
Communication between mobile devices and flight control boards can be achieved through Bluetooth, you can use mobile devices to set the parameters of the flight controller.Any Bluetooth module compatible with your mobile device can be used, but if using the SpeedyBee Bluetooth-UART Adapter, this Bluetooth module will deactivate and activate automatically according to the status of the drone(armed/disarmed), no Bluetooth signal interference during the flight.
Flight Controller Requirements:
Betaflight firmware version ≥ 3.1.0
iNav FC version ≥ 1.8.1
Butterflight firmware version ≥ 3.1.0
System Requirements : iOS 12.0+
Instructions for use：
1.Connect the Bluetooth PCB with the UART interface of the Flight Controller, or use the flight controller integrated Bluetooth.
2.Open the Betaflight Configurator, on the Ports tab, open the Configuration/MSP port of the Bluetooth PCB, for the Bluettooth module of BLE4.0, 19200 is the recommended baud rate value.
3.Open the APP, connect the Flight Controller via Bluetooth, and you can adjust the parameters now.
What’s New
Version 1.8.17
1. Adapted to new Meteor LED.
Ratings and Reviews
It saved me many times
This is extremely useful where you need to make the changes on the fly.
Imagine when you arrive in a place the all the sudden you need to modify the parameters and have to go back home to connect to computer.
SpeedyBee can do that with your iOS device.
There’s one UI layout error in Modes tab where “Add Range” is outside of screen. No way I can assign other than typing in CLI commands.
One time I finished building a quad and tested in field. I forgot to set motor direction, SpeedyBee had an unique feature allowing you to change motor direction for each motor right inside Betaflight. Amazing!!
Another problem with using CLI:
- SpeedyBee Bluetooth edition gives garbled results after typing diff command (garbled then froze)
- SpeedyBee Wifi edition does faster but it keeps missing the packets where I don’t get full dump result. Missing many lines. Not reliable.
I like the product. I will still use it on field. I still need to bring laptop until all the bugs on the app are fixed.
Works Great! Would like to see INAV 8.0
Would appreciate inav 8.0 support
Does not work on iPad Air
Does not boot up...just closes screen.
App Privacy
The developer, CAMERA2000 LIMITED, indicated that the app’s privacy practices may include handling of data as described below. For more information, see the developer's privacy policy.
Data Not Linked to You
The following data may be collected but it is not linked to your identity:
- User Content
- Other Data
Privacy practices may vary, for example, based on the features you use or your age. Learn More
Information
- Seller
- CAMERA2000 LIMITED
- Size
- 299.9 MB
- Category
- Utilities
- Compatibility
-
- iPhone
- Requires iOS 12.0 or later.
- iPad
- Requires iPadOS 12.0 or later.
- iPod touch
- Requires iOS 12.0 or later.
- Mac
- Requires macOS 11.0 or later and a Mac with Apple M1 chip or later.
- Apple Vision
- Requires visionOS 1.0 or later.
- Languages
-
English, Simplified Chinese
- Age Rating
- 4+
- Copyright
- Copyright ©2018 LangTian Technology (Shenzhen) Co., Ltd. All rights reserved.
- Price
- Free